Ultra Shield Ratchet Lap Belts and 5 Point Racing HANS Harness Black

Ultra Shield's Latch and Link Harnesses with Ratcheting Lap Belts are designed for ultimate tightening and assembled in the USA. Constructed from 3 inch wide, polyester webbing that consist of 2 shoulder belts and a lap belt. Shoulder belts are folded and sewn into a 1 /3/4 inch width. This allows a more natural fit onto all SFI 38.1 certified head and neck restraints. The sub belt is 1 3/4" wide. All 5 belt ends converge into the latch and link mechanism which is attached to each side of each lap belt. The ratcheting assembly can be attached to either the left or right side lap belt.

After installation, length adjustment and just prior to racing, the shoulder belts achieve their final and maximum tightening by "Pulling Down" on the tighteners. 1 lap belt has an adjustable length, the other lap belt tightens all through the ratchet mechanism. 1/4 inch drive ratchet socket is included.

Belt ends are attached to the race car chassis and/or cage structure through 2 methods, either "Bolt In" or "Wrap Around" The ratchet mechanism "Bolt In".

Ultra Shield Ratchet Lap Belts and 5 Point Racing Harnesses are SFI 16.1 Certified with a current dated tag for technical inspections.

Hardware comes in a medium gloss Black.