G-Force 6460 Junior Latch and Link 5 Point 2 inch Pull Up Harness Black SFI 16.2
G-Force 6460 Latch and Link 5-Point 2 inch Pull-Up Racing Harness System.
Constructed from 2 inch wide (actually 1 3/4"), webbing that consist of 2 shoulder belts, a lap belt and a crotch belt. All 5 belt ends converge into the latching mechanism which is attached to each side of each lap belt.
After installation, length adjustment and just prior to racing, the shoulder belts achieve their final and maximum tightening by "Pulling Down" on the tighteners. The lap belts "Pull Up" to tighten. Many adults prefer the "Pull Up" option as they feel it is easier and more accurate to perform the final lap belt tightening from outside the race car. The crotch belt, also known as the sub belt, is adjustable to a fixed length.
Belt ends are attached to the race car chassis and/or cage structure through 2 methods, either "Bolt In" or "Wrap Around". The Bolt In Option includes a pre-drilled metal end that the belt runs through, this end is bolted to a seat belt tab. The Wrap Around Option simply excludes the metal end as the belt is wrapped around a roll cage tube and weaved back into the included 3 Bar Slide. All belt ends come with the pre-drilled metal end that can easily be removed in order to convert to Wrap Around.
The G-Force 6460 Latch and Link 5-Point 2 inch Pull-Up Racing Harness System is SFI 16.2 Certified with a current dated tag for technical inspections.
Available in Black webbing.
Constructed from 2 inch wide (actually 1 3/4"), webbing that consist of 2 shoulder belts, a lap belt and a crotch belt. All 5 belt ends converge into the latching mechanism which is attached to each side of each lap belt.
After installation, length adjustment and just prior to racing, the shoulder belts achieve their final and maximum tightening by "Pulling Down" on the tighteners. The lap belts "Pull Up" to tighten. Many adults prefer the "Pull Up" option as they feel it is easier and more accurate to perform the final lap belt tightening from outside the race car. The crotch belt, also known as the sub belt, is adjustable to a fixed length.
Belt ends are attached to the race car chassis and/or cage structure through 2 methods, either "Bolt In" or "Wrap Around". The Bolt In Option includes a pre-drilled metal end that the belt runs through, this end is bolted to a seat belt tab. The Wrap Around Option simply excludes the metal end as the belt is wrapped around a roll cage tube and weaved back into the included 3 Bar Slide. All belt ends come with the pre-drilled metal end that can easily be removed in order to convert to Wrap Around.
The G-Force 6460 Latch and Link 5-Point 2 inch Pull-Up Racing Harness System is SFI 16.2 Certified with a current dated tag for technical inspections.
Available in Black webbing.
RaceDay Safety Part No. RDS-6460BK
G-Force Racing Gear 6460BK
G-Force Racing Gear 6460BK
You May Also Like
Recently Viewed
